Skip to content
Menu
Homepage Technologies
Woman with short grey hair wearing black over-ear headphones

How to Pair Beats Headphones: A Step-by-Step Guide

Pair your Beats headphones with an iPhone, Android phone, laptop or tablet in minutes, plus fixes for the pairing problems that catch people out.

The short answer

Every current pair of Beats is a Bluetooth headset, so pairing is the same two-part job whatever model you own: put the headphones into pairing mode, then pick them from the Bluetooth list on your phone, tablet or computer.

To get into pairing mode, hold the power button for about five seconds until the indicator light flashes. If your Beats are true wireless earbuds that live in a charging case, open the lid with both earbuds inside and hold the small button on the case instead. Then open your device's Bluetooth settings and tap the Beats name.

If you have an iPhone or iPad signed in to your Apple ID and a recent Beats model, you often don't need the settings menu at all: switch the headphones on, hold them a few centimetres from the phone, and tap Connect on the card that appears.

What you need before you start

Charge:
Headphones or case with enough power to switch on. A flat battery is the most common reason pairing mode never starts.
Your device:
A phone, tablet or computer with Bluetooth switched on, within about a metre of the headphones.
The model name:
The name printed on the headband, earcup or case lid — that's the name you'll look for in the Bluetooth list.
A quiet minute:
Take the headphones off before you start. Button holds and light flashes are much easier to see with them in your hand.

Step 1: put your Beats into pairing mode

  1. Find the right button

    Over-ear and on-ear models use the power button on the earcup. True wireless earbuds use the small round button on the charging case. Neckband models use the power button on the band.

  2. Switch on, then keep holding

    Press and hold the power button for about five seconds. Carry on through the first chime — the one that just means 'switched on' — and release when the indicator light starts flashing.

  3. Or use the case button

    For earbuds: leave both earbuds in the case, open the lid and hold the button on the case until the light on the case flashes. Pairing sometimes needs a longer hold than the quick press you use to check the charge.

  4. Watch for the flashing light

    A rapid flash means pairing mode; a single steady blink does not. If nothing flashes, the headphones may already be connected to a device nearby — turn Bluetooth off on that device and try again.

Step 2: pair with an iPhone or iPad

  1. Open Settings and Bluetooth

    Go to Settings > Bluetooth and make sure the toggle is green. Keep the screen unlocked while you pair.

  2. Bring the headphones close

    Hold them within a few centimetres of the iPhone or iPad. On models with Apple's wireless chips, a card appears showing the product and a Connect button.

  3. Tap Connect, or use the list

    If no card appears within about 20 seconds, scroll to Other Devices at the bottom of the Bluetooth screen and tap the Beats name there.

  4. Confirm the request

    Accept the pairing prompt if one appears. The headphones then move up to My Devices and show as Connected.

Step 3: pair with an Android phone, Windows PC or Mac

  1. Android phone or tablet

    Open Settings > Connected devices > Pair new device (the wording varies slightly by manufacturer), wait for the Beats name to appear and tap it. The Beats app is optional — it handles firmware updates and control settings on supported models, but you don't need it to pair.

  2. Windows laptop or desktop

    Go to Settings > Bluetooth & devices > Add device > Bluetooth, then choose your Beats from the list. On Windows 10 the path is Settings > Devices > Add Bluetooth or other device.

  3. Mac

    Open System Settings > Bluetooth, find the headphones under Nearby Devices and click Connect.

  4. Check the sound output

    On a computer, pairing and audio output are two separate settings. If the headphones connect but the sound still comes out of the speakers, select the Beats in the sound output menu.

Switching between devices you've already paired with

Beats headphones can remember several devices, but they stream from only one at a time. The reliable way to move across is to disconnect from the device you're leaving — switch its Bluetooth off, or use its Bluetooth list to disconnect — and then connect from the other device.

If both devices are in range with Bluetooth on, the headphones usually return to whichever one connected most recently. That's why your laptop sometimes snatches the connection back halfway through a song: it woke from sleep and reconnected on its own.

When pairing goes wrong

Common pairing problems and the fix that usually works
What you seeLikely causeWhat to do
No light when you hold the buttonBattery too low, or already connected elsewhereCharge for 15–20 minutes, then turn Bluetooth off on any device it has paired with before
Beats appear in the list but won't connectA stale pairing record on the phone or laptopChoose Forget or Unpair next to the name, then pair again from scratch
It connects, then drops after a few secondsInterference or too much distanceMove away from USB hubs, Wi-Fi routers, microwaves and crowded commuter carriages
It says connected but there's no soundThe wrong audio output is selectedCheck the sound output menu on a computer, or the audio tile in your phone's Control Centre or quick settings
The name never shows up at allThe headphones aren't in pairing modeRepeat the button hold and wait for the rapid flash before searching again

If none of those work, reset the headphones. The routine differs by model — usually a long press of the power button, or a longer hold of the case button — so follow the instructions for your exact model rather than guessing, because holding the wrong combination puts some models into a service mode you then have to escape.

A reset clears the pairing memory, so every device has to be paired again afterwards. It's a last step, not a first one.

Firmware fixes a lot of stubborn connection bugs. On Android, updates for supported models come through the Beats app; on an iPhone or iPad they install when the headphones are connected to the device.

Getting a reliable connection day to day

  • Keep the battery above the point where the headphones start dropping the link; low power causes more dropouts than people expect.
  • Clear out old phones and tablets from the Bluetooth list when you upgrade, so the headphones aren't hunting for devices that no longer exist.
  • Keep the phone and the headphones roughly on the same side of your body — a phone in a back pocket with a body in between is a weak link.
  • Pair at home rather than on a train platform, where dozens of devices are searching at once.
  • If you use the headphones for video calls, check which microphone the meeting app is using, because pairing doesn't automatically switch the mic on every app.

Safety and easy mistakes

Keep the volume at a level you could still hold a conversation over, and take the headphones off if you need to hear traffic, announcements or a smoke alarm. Don't wear them while driving, and don't cycle on the road with both earbuds in.

When charging, use the cable and power adapter that came with the headphones or another reputable one, and stop using a cable with a frayed end or a case that has been dropped in water.

If you'd rather not use Bluetooth

Some over-ear and on-ear Beats ship with a 3.5mm RemoteTalk cable, and plugging it in switches the headphones to wired listening. On many of those models the cable works even with a flat battery, though noise cancelling and the on-earcup controls won't. At least one current over-ear model also accepts audio over USB-C.

True wireless earbuds have no wired option at all, so a flat case means no listening until it's charged. There's also no pairing to do in wired mode — the cable is the connection.

Common questions about pairing Beats

Do I need the Beats app to pair my headphones?

No. Pairing happens in your device's own Bluetooth settings. The app is only useful for firmware updates and button or sound settings on supported models, and it's Android-only.

Can my Beats stay connected to two phones at once?

They can store several paired devices but play from one at a time. To move across, disconnect on the current device and connect from the other.

Why do my Beats keep connecting to my laptop instead of my phone?

The headphones return to the last device that asked to connect. Switch Bluetooth off on the laptop, or disconnect the headphones in its Bluetooth settings, before you reach for your phone.

What's the range like?

Expect around 10 metres in open space, less through walls, doors and a full bag. Most dropouts are distance or interference rather than a pairing fault.

Does resetting delete anything important?

It clears the headphones' pairing memory and returns their settings to default. Your music, apps and phone contacts are untouched — you just have to pair again.