Skip to content
Menu
Homepage Technologies
Student using a desktop monitor at a desk in a classroom

How to Measure a Computer Monitor Screen Size

Measure a monitor's screen size the right way: what counts as the screen, how to read the diagonal, convert to inches and check the spec.

The short answer: it's the diagonal of the visible screen

Screen size is the distance from one corner of the visible display area to the opposite corner — the diagonal — and it is quoted in inches. You measure only the part of the panel that actually shows a picture. The plastic bezel around it, the stand, the speakers and the ports are not part of the figure.

Here in the UK monitors are still sold by their inch size even though most tape measures are metric, so you will usually be converting. The maths is simple: 1 inch is 2.54 cm, so a diagonal of 68.6 cm is a 27-inch screen (68.6 ÷ 2.54 = 27).

Unit the size is quoted in:
Inches, measured diagonally across the panel
Exactly what to measure:
Corner to corner across the lit picture area only
What to leave out:
Bezel, frame, stand, speakers, ports and cables
Metric conversion:
1 inch = 2.54 cm; divide a centimetre reading by 2.54 to get inches
Where to double-check:
The model number and the manufacturer's specification sheet

What you need before you start

This is a two-minute job, but the wrong tools give a wrong number:

  • A tape measure longer than the diagonal. A 30 cm ruler will not span a desktop monitor. A retractable metal tape is ideal because it stays straight.
  • A tape that shows both scales. Dual metric/imperial tapes save the conversion at the end.
  • A plain white image. Open a blank document in full-screen mode, or display a white picture, so the edges of the lit area are obvious.
  • A soft cloth. For wiping fingerprints off the panel afterwards rather than pressing on it.
  • The model number. It is usually on a sticker on the back or the base, and it lets you confirm the size afterwards.
  • Something to write on. You will want to note the first reading before you take a second one.

Step by step: measuring the screen

  1. Display a plain white image

    Switch the monitor on and fill the screen with white — a blank word-processing page in full-screen view works well. The lit area against the dark surround is the edge you are measuring to. On a monitor that is switched off, especially one with a very thin bezel, that edge is almost impossible to see.

  2. Find the true edge of the picture

    Look for the narrow black seam between the last row of pixels and the plastic frame. If it is hard to spot, tilt the screen slightly or shine a torch across it at a low angle — the seam catches the light. Do not guess: measuring to the outside of the bezel will give you a figure that is too big.

  3. Anchor the end of the tape in one corner

    Put the zero mark, or the hook on the end of the tape, exactly in the corner of the visible picture. Rest the hook over the corner gently or hold it there with a fingertip. It should sit on the corner of the image, not on the frame around it.

  4. Pull the tape to the opposite corner

    Take the tape diagonally to the far corner, keeping it flat and taut against the panel. Keep it a millimetre or two clear of the glass rather than pressing down on it — a tiny gap will not change the reading in any way that matters, but pressure on the panel can.

  5. Read the mark square-on

    Look at the tape straight on rather than from the side, and read where the corner of the picture falls. Note the figure in centimetres and in inches if your tape has both scales.

  6. Repeat on the other diagonal and convert

    Measure from the other two corners as a check. The two readings should agree closely. If your tape is metric, divide the result by 2.54 to get the quoted inch size.

If you can only reach the width and height

Sometimes the bezel is too deep, or the monitor is boxed in on a desk, and you cannot lay a tape across the diagonal. Measure the visible width and the visible height instead and work the diagonal out with Pythagoras:

diagonal = √(width² + height²), keeping both measurements in the same unit.

As a worked example, a 16:9 screen measuring 60 cm wide and 34 cm tall gives 3600 + 1156 = 4756. The square root of 4756 is about 69 cm, and 69 ÷ 2.54 is approximately 27 inches.

This method is only as good as your width and height readings, so measure each one twice and use the same points — the lit area, not the outer case.

Confirming the size without a tape measure

If the monitor is already mounted or you simply want to check your reading, there are several reliable places to look:

  • The model number. Manufacturers often build the size into the name, and a search for the exact model brings up the specification sheet with the diagonal listed.
  • The specification sheet or product page. Look specifically for the field labelled screen size or display size, which is the diagonal. Be careful with the field labelled dimensions — that is the physical size of the whole unit, stand included.
  • The manual or quick-start leaflet. The first page usually repeats the panel size.

What you cannot do is read the size off your operating system. Windows (Settings, then System, then Display) and macOS (System Settings, then Displays) report resolution, scaling and refresh rate — how many pixels the screen has, not how wide it is in inches. Resolution is not a proxy for size either: a 24-inch and a 27-inch monitor can both be 1920 × 1080.

What the diagonal tells you — and what it doesn't

The diagonal is a comparison figure. It is not a description of how much desk the monitor will take up, and two screens with the same diagonal can feel completely different depending on their shape. A 27-inch ultrawide is far wider and much shorter than a 27-inch 16:9 screen, yet both are sold as 27-inch.

Useful measurements when you are checking whether a monitor will fit, not just how big it is
MeasurementWhat it tells youWhen you need it
Diagonal (screen size)The quoted size of the panel, corner to cornerComparing monitors and matching a specification sheet
Visible picture widthHow much desk width the image itself takes upJudging the gap between two screens side by side
Overall width including bezelThe full footprint of the display unitChecking clearance against a wall, shelf or divider
Height including the standHow high the top of the monitor sitsFitting under a shelf or a wall cabinet
Depth of the stand or baseHow far forward the monitor reachesDesk depth and room left for a keyboard
Pixel densityHow sharp the image looks at your normal viewing distanceChoosing between two screens of the same size but different resolution

If you are buying for a specific space, measure the space first and write down four figures: available width, available height, available depth and the distance you sit from the screen. Then compare those against the monitor's dimensions with the stand fitted, not just its diagonal.

Common mistakes and how to fix them

  • Measuring to the outside of the frame. The reading comes out larger than the quoted size by roughly the width of the bezel. Start again from the lit area.
  • Using a soft tailor's tape. It sags away from the panel and reads long. Use a rigid tape or a long straight edge.
  • Holding the tape at an angle or letting the hook slip. The end drifts into the middle of the screen and you lose a centimetre or two. Anchor it firmly in the corner and read the tape square-on.
  • Measuring across a curved screen with a rigid tape. A straight tape bridges the curve, so the reading does not match the panel figure the manufacturer quotes. Note it down, then confirm from the specification sheet.
  • Converting the wrong way. To go from centimetres to inches, divide by 2.54. To go from inches to centimetres, multiply. Doing the opposite turns a 27-inch monitor into a 69-inch one.
  • Measuring the box or the stand. Packaging dimensions describe the cardboard, and stand dimensions describe the base. Neither is the screen size.
  • Assuming a bigger diagonal always means a bigger picture. Ultrawide and 16:10 panels change the height and width for the same diagonal.

Frequently asked questions

Do UK retailers quote monitor size in inches or centimetres?

The headline size is almost always in inches, because that is the industry convention, but specification tables usually give the physical dimensions in millimetres or centimetres as well. Treat the inch figure as the screen size and the metric figures as the case measurements.

Is the screen size measured corner to corner or straight across?

Corner to corner, on the diagonal, across the part of the panel that lights up. Measuring straight across the width only gives you the width, which varies with the shape of the screen and is not the size the monitor is sold by.

My tape measure reads slightly less than the advertised size — is something wrong?

Usually not. Quoted sizes are nominal and rounded, thin bezels make the exact edge hard to pin down, and a small difference between your reading and the box is normal. If the gap is large, check that you measured the lit area rather than the inner edge of the frame.

Does the stand or the bezel add to the screen size?

No. The screen size is the panel alone. The stand and bezel do matter for a different reason: they decide the monitor's overall width, height and depth, so check those separately when you are working out whether it will fit.

Can I use the same method on a laptop or a television?

Yes. The principle is identical for any flat panel — measure the visible picture diagonally, corner to corner, and convert the result to inches. Curved televisions are the awkward case, for the same reason as curved monitors.