
How to Connect AirPods to a Laptop (Windows and Mac)
Pair your AirPods with a Windows or Mac laptop in minutes: clear steps, quick fixes for common pairing problems and battery-saving tips.
The short answer
Pairing AirPods with a laptop is a standard Bluetooth job. On a Windows laptop, open Settings > Bluetooth & devices, choose Add device > Bluetooth, then select your AirPods once the case is in pairing mode. On a Mac signed in with the same Apple Account, the AirPods usually appear automatically; if not, open System Settings > Bluetooth and select them.
Once paired, the laptop remembers them and reconnects when you put the AirPods in your ears — provided Bluetooth is on and the AirPods have charge.
What you need before you start
- A laptop with Bluetooth switched on. Most modern Windows and Mac laptops have it built in; a few older or budget models do not.
- Both AirPods charged and sitting in their charging case with the lid open.
- The charging case itself. Pairing mode is triggered from the case, so you cannot pair with the earbuds alone.
- For a Mac, the same Apple Account used on your iPhone if you want the AirPods to pair automatically across your devices.
- A few minutes. The initial pairing is quick, but Windows can take longer while it installs the audio driver.
Pair AirPods with a Windows laptop
Turn on Bluetooth
Open Settings > Bluetooth & devices and switch Bluetooth on. On Windows 10, the path is Settings > Devices > Bluetooth & other devices.
Put the AirPods in pairing mode
Put both earbuds in the case, open the lid and press and hold the setup button on the back of the case until the status light flashes white. If your case has no setup button — the AirPods 4 case works this way — double-tap the front of the open case instead.
Add the device
Click Add device (or Add Bluetooth or other device) and choose Bluetooth. Windows will scan for nearby devices.
Select your AirPods
Choose AirPods from the list. Windows may label them as AirPods or AirPods Pro. Wait while it installs the audio driver; the entry should move to the audio section or show as connected.
Choose the stereo output
Click the speaker icon in the taskbar and select the plain AirPods entry, not AirPods Hands-Free AG Audio, for music and video.
Test the sound
Play something, then use the volume keys. If the sound still comes from the laptop speakers, reselect AirPods as the output device.
Pair AirPods with a Mac
On a Mac, AirPods often pair automatically if the Mac is signed in to iCloud with the same Apple Account as the iPhone they were set up with. Put the AirPods in your ears and choose them from the Control Centre sound menu or the Bluetooth menu in the menu bar.
Open Bluetooth settings
Go to the Apple menu, then System Settings > Bluetooth.
Put the AirPods in pairing mode
Put both earbuds in the case, open the lid and hold the setup button until the status light flashes white. On a case without a button, double-tap the front of the open case.
Select AirPods
Click Connect next to AirPods. If they do not appear, wait a few seconds and check that the light is still flashing.
Set input and output
Open System Settings > Sound and choose AirPods for output. Choose AirPods or the built-in microphone for input, depending on what you prefer for calls.
Windows sound settings that catch people out
Windows treats AirPods as two devices: a stereo output for listening and a hands-free headset for the microphone. The hands-free mode sounds noticeably worse, and it can switch on by itself when an app opens the microphone — for example, a video call. If audio suddenly becomes thin or muffled, check which output device is selected.
| What you see | What it is | When to use it |
|---|---|---|
| AirPods | Stereo headphones profile | Music, video and most listening |
| AirPods Hands-Free AG Audio | Headset profile with microphone | Calls only; sound quality drops |
| AirPods Stereo (or similar) | Some drivers add a second stereo entry | Try the other entry if the first is silent |
| Laptop speakers | The laptop's built-in speakers | Means the AirPods are not selected |
Troubleshooting: when the AirPods won't connect
| Symptom | Likely cause | What to try |
|---|---|---|
| AirPods don't appear in the list | Not in pairing mode, or too far away | Reopen the case, hold the button until the light flashes white, and keep the case within a metre of the laptop. |
| AirPods appear but won't connect | Stale Bluetooth entry | Remove the AirPods from the laptop's Bluetooth list, then pair again from scratch. |
| Connected but no sound | Wrong output selected | Pick the stereo AirPods entry in the sound menu, not the hands-free one. |
| Sound cuts out | Weak signal or interference | Move the case and laptop closer, away from USB hubs, microwaves and crowded Wi-Fi. |
| Only one earbud plays | One earbud is out of the case or flat | Put both back in the case, close the lid for a few seconds, then take both out together. |
| Light flashes amber | Case or earbuds need charge | Leave them on charge for a few minutes; pairing can fail on very low battery. |
Reset the AirPods if pairing is still stuck
Put both AirPods in the case
Close the lid and wait a few seconds. This settles the earbuds into the case properly.
Hold the setup button
Open the lid and hold the setup button for about 15 seconds, until the status light flashes amber and then white. On cases without a button, check Apple's reset steps for your model.
Pair again
Release the button, remove the old AirPods entry from the laptop's Bluetooth list, then repeat the pairing steps.
Status light, battery and charging
- Flashing white:
- Pairing mode — the case is ready to be found
- Flashing amber:
- Not enough charge to pair, or charging is incomplete
- Solid green:
- Fully charged
- Solid amber:
- Charging, or less than full
- No light:
- Case is flat or the lid is closed
Keeping the connection reliable
- Turn Bluetooth off and on again if the AirPods drop mid-session.
- Keep the case lid open when pairing. A closed case will not enter pairing mode.
- Charge the case regularly. Low battery is the most common reason pairing fails.
- After a reset, remove the old entry from the laptop. Otherwise the laptop may keep trying the stale one.
- If you use a USB-C or Thunderbolt dock, plug a Bluetooth adapter directly into the laptop rather than the dock.
What you lose on a non-Apple laptop
AirPods work as standard Bluetooth earbuds on Windows. Apple-only features — automatic switching between devices, spatial audio with head tracking, Siri and the battery widget — are unavailable or limited. The microphone works, but Windows uses a lower-quality hands-free profile, so for important calls a dedicated headset microphone is often clearer. This does not mean the AirPods are faulty; it is how the Bluetooth profiles behave.
Common questions
Can I use AirPods with a Chromebook or Linux laptop?
Yes, if the laptop has Bluetooth. Pair them as standard Bluetooth headphones; Apple-specific features such as automatic switching and Siri will not be available.
Do I need to press the button every time I connect?
No. The setup button is only for the first pairing or after a reset. After that, open the case near the laptop or select the AirPods from the Bluetooth menu.
Why do my AirPods connect to my phone instead of the laptop?
AirPods connect to the last device that used them, and Apple devices signed in to the same account can claim them automatically. Turn off Bluetooth on the phone or select the AirPods on the laptop's Bluetooth menu.
Can I use the AirPods microphone on Windows?
Yes, but Windows switches to the hands-free profile, which lowers sound quality. Choose the headset entry for calls and the stereo entry for listening.
How do I disconnect AirPods from a laptop?
On Windows, go to Bluetooth & devices, select the AirPods and choose Remove device. On a Mac, click Disconnect in Bluetooth settings or turn Bluetooth off.












