Skip to content
Menu
Homepage Technologies
Man at a desk with monitor by a sunny window

How to Adjust Monitor Brightness in Windows, macOS and Linux

Brightness is set in three places: the monitor's own menu, Windows or macOS, and the keyboard. Here's which to use, and how to fix a missing slider.

The short answer

Monitor brightness is controlled in up to three places, and which one works depends on the screen in front of you:

  • The monitor's own menu – the buttons or joystick on the bezel of an external display. On most desktop monitors this is the only control that actually changes the backlight.
  • The operating system – the brightness slider in Windows Settings or macOS Displays. On a laptop this controls the built-in screen; on a desktop with a separate monitor it often does nothing at all.
  • The keyboard – the brightness keys on a laptop, usually F1 and F2 or another pair on the top row.

Start with the control that belongs to the screen itself: the monitor's buttons for a desktop display, the keyboard or Control Centre for a laptop. Then judge the result against the light in the room, not against the brightest setting the panel can reach.

Before you start

You need about five minutes and no special tools. Four things make the job easier:

  • Set it in your normal light. Adjusting brightness at midnight and then working at noon the next day gives you a setting that suits neither.
  • Open a mostly white page – a blank document or a search results page – so you can judge the white level properly.
  • Note the current value, whether that is a number in the monitor menu or a slider position, in case you want to go back.
  • Decide which screen you are adjusting if a laptop is docked to a monitor, because the two are controlled separately.
Brightness unit:
Candelas per square metre (cd/m²), often just called nits
Typical indoor range:
Most desk monitors are comfortable between roughly 100 and 250 cd/m² for indoor work
Common calibration target:
Around 120 cd/m² for a dimly lit office, checked against a sheet of white paper
Contrast control:
Separate from brightness; leave it at the factory default unless you are calibrating
Ambient light:
The room matters as much as the setting, so judge brightness where you actually work

Change brightness in Windows

  1. Open the quick settings panel

    Click the volume, network and battery cluster at the right-hand end of the taskbar in Windows 11, or the notification icon at the far right in Windows 10. The brightness slider sits at the bottom of the panel that opens.

  2. Drag the slider a step at a time

    Move it in small increments rather than jumping from end to end, and keep a white document open behind the panel so you can see the effect.

  3. Use the Settings page for finer control

    Go to Settings > System > Display and use the Brightness slider in Windows 11, or the Change brightness slider under Brightness and colour in Windows 10. Use this page if the quick panel slider is missing.

  4. Turn off automatic brightness

    On the same Display page, untick Change brightness automatically when lighting changes if the screen keeps drifting brighter and darker on its own. On a laptop, also check that battery saver is off, because it dims the screen as the battery drops.

  5. Adjust an external monitor at the monitor

    With a desktop and a separate screen, the Windows slider will not appear. Use the monitor's buttons, or the graphics driver control panel (Intel, AMD or NVIDIA) if the display accepts brightness commands over DDC/CI.

Change brightness on a Mac

  1. Use the brightness keys

    Press the brightness up and down keys on the top row, usually F1 and F2, or use the Display brightness slider in the Touch Bar on older MacBook Pro models. Each press moves one step; hold a key to move faster.

  2. Use Control Centre

    Click the Control Centre icon in the menu bar and drag the Display slider. On recent versions of macOS the same slider appears in the Display section of Control Centre.

  3. Use System Settings

    Open System Settings > Displays and use the Brightness slider. This is also where you can untick Automatically adjust brightness if the screen changes on its own.

  4. Treat an external monitor separately

    A third-party monitor connected by HDMI or DisplayPort is usually outside macOS brightness control, so adjust it with its own buttons. Some USB-C and Thunderbolt displays do respond to the Mac's keys and sliders.

Adjust an external monitor with its own buttons

Almost every desktop monitor has an on-screen display (OSD) – a small menu drawn by the monitor itself, independent of the computer. It works even with no computer connected, which is why it is the reliable control when the operating system gives up.

  1. Find the controls

    Look along the bottom edge of the bezel, under the right-hand corner, or on the back right of the panel. You will find a row of small buttons, a single joystick-style nub, or a rocker switch.

  2. Open the menu

    Press the button marked Menu, or press the joystick inwards. A menu appears over the picture.

  3. Go to the picture settings

    Navigate to Picture, Image or Brightness/Contrast. With a joystick, push up, down, left and right to move and press in to select.

  4. Set the brightness

    Highlight Brightness, then change the value with the same controls. Watch the white page behind the menu as you go, then close the menu to judge the final result without an overlay in the way.

  5. Exit and save

    Press Menu or the joystick once more to close the menu. Most monitors save the setting immediately; a few ask you to confirm with OK or Exit.

Brightness on Linux and with software dimming

Desktop Linux exposes brightness in much the same places as the other systems. GNOME and KDE both have a brightness slider in their quick settings and display panels, and command-line tools such as brightnessctl handle most laptops. Everything said above about external monitors applies here too: the monitor's own menu is still the honest control.

Software dimming is a different thing entirely. Commands such as xrandr --brightness 0.7, and many screen-dimmer utilities, scale the image the computer sends rather than turning the backlight down. The picture gets darker, but blacks lift, contrast drops and the result can look grey and washed out.

Find a level that's comfortable and accurate

Judge brightness against your surroundings, not against the brightest setting the panel can reach. Sit at your normal distance, in your normal lighting, and open a page that is mostly white. Then step the brightness down until the white of the screen looks about as bright as a sheet of paper lying on the desk under the same light. That single comparison does most of the work.

Direction matters: start high and come down. It is easy to overshoot upwards in a bright room and end up with a screen that feels fine for ten minutes and tiring after two hours.

Leave some headroom as well. A monitor running at maximum brightness ages faster, runs warmer and often clips highlight detail. Most people land somewhere in the middle of the range.

Brightness by room
Where you're workingSensible starting pointWhat to watch for
Sunny room, screen facing a windowUpper part of the rangeReflections and glare; a matte screen or a repositioned desk helps more than extra brightness
Typical office or living room lightingMiddle of the rangeMatch white on screen to white paper on the desk
Dim room in the eveningLow end of the rangeDon't raise brightness because a lamp is behind the screen — move the lamp
Dark room, lights offMinimum comfortable settingCheck for flicker and eye strain, which some panels show at very low levels

When brightness and contrast get confused

Brightness and contrast are separate controls and they solve different problems:

  • Brightness raises or lowers the backlight, and on an OLED panel the black level. If the whole picture feels too bright or too dim, this is the control you want.
  • Contrast changes the step between the darkest and lightest parts of the image. Turned up too far it clips whites and swallows shadow detail; turned down the picture looks flat and grey.
  • Night modes – Night Light in Windows, Night Shift on macOS – warm the picture in the evening. They do not reduce brightness, though a warmer screen often feels less harsh.
  • HDR changes the rules. With HDR switched on in Windows the normal slider may disappear; look for the SDR brightness control under Settings > System > Display > HDR and use the monitor's HDR picture mode for the rest.

What commonly goes wrong — and the fix

  • The brightness slider is greyed out or missing. You are on an external display. Use the monitor's buttons, or check the graphics driver control panel.
  • The screen changes brightness on its own. Adaptive brightness or an ambient light sensor is doing it. Turn it off in Windows Display settings, macOS Displays, or the monitor menu, where it may be called Eco, Auto Brightness or DCR.
  • The setting resets after a restart or an input change. Some monitors keep separate picture settings for each port and let an Eco or power-saving mode override the manual value. Set brightness on the input you actually use.
  • The picture looks washed out after dimming. You are probably using software dimming. Switch it off and use the monitor's backlight control instead.
  • The menu freezes or the buttons stop responding. Unplug the monitor from the mains for 30 seconds, plug it back in and try again; if it persists, check for an OSD lock.
  • The image flickers at low brightness. Some panels use backlight modulation that becomes visible at low levels. Raise brightness slightly and lower the room lighting instead.

Keep it comfortable through the day

Brightness is not a set-and-forget number. As the light changes – a sunny morning turning into an overcast afternoon, or a desk lamp switched on at five o'clock – a setting that was right can become glaring or murky. Two or three small adjustments a day is normal and takes seconds.

If you regularly work in a bright daytime room and a dim evening one, consider two saved settings. Many monitors let you store values in picture modes such as Standard, Custom or Reader and switch between them with one button, and on a laptop the brightness keys are quick enough on their own.

Re-check the setting whenever you move the desk, change chair height or add a lamp, because all three change how much light reaches your eyes.

Common questions about monitor brightness

Why is there no brightness slider in Windows on my desktop PC?

Windows only offers the slider for displays it can control directly, which in practice means laptop and tablet screens. With a separate monitor connected by HDMI or DisplayPort, the setting usually disappears and the monitor's own buttons take over.

Does turning the brightness down save battery on a laptop?

Yes. The backlight is one of the largest power draws on a laptop, so dropping brightness a few steps typically extends runtime more than most software tweaks. Software dimming does not have the same effect.

Should I change brightness or contrast first?

Brightness. Set it so white on screen looks like paper in your room, then leave contrast where the factory put it unless you are calibrating with a colorimeter or a test pattern.

Is a dimmer screen better for your eyes?

Only up to the point where the screen matches the room. A screen much brighter or much dimmer than its surroundings makes your eyes work harder, and extreme dimness in a bright room is as uncomfortable as full brightness in the dark.

Why does my monitor forget the brightness setting?

The usual causes are a power-saving or Eco mode that overrides the manual value, separate picture settings stored per input, and monitors that reset when they lose mains power at the wall. Set brightness on the input you use and switch off Eco modes.

Does HDR affect the brightness controls?

Yes. With HDR enabled in Windows the standard slider often vanishes and the monitor may lock its own brightness control. Use the SDR brightness slider in the HDR settings and the monitor's HDR picture mode for the rest.